Endeavor 3D News

The Department of Defense is Outsourcing to Contract Additive Manufacturers

June 18th, 2024 – The defense industry is increasingly outsourcing to leverage Additive Manufacturing (AM) for enhanced operational readiness and supply chain resilience. Initiatives, like the U.S. Department of Defense’s AM Strategy and AM Forward, are driving collaborations with contract manufacturers to modernize military capabilities and ensure on-demand production of critical parts.


Endeavor 3D Becomes First Contract Manufacturer to Offer PA 12 S in the US

June 13th, 2024 – Endeavor 3D is proud to announce the introduction of PA 12 S, an eco-friendly material developed by Arkema. As the first contract manufacturer in the United States to offer PA 12 S, Endeavor 3D positions itself as a leader in sustainable and high-quality additive manufacturing (AM) material solutions.


Georgia Tech's Manufacturing 4.0 Consortium Announces New Industry Member Chair, John Flynn

May 22nd, 2024 – The Georgia Tech Manufacturing 4.0 Consortium, dedicated to advancing manufacturing technologies and fostering industry-academic partnerships, has appointed John Flynn, VP of Sales at Endeavor 3D, as the new Industry Membership Chair. Flynn, alongside John Arroues of TRAK Machine Tools as Co-Chair, will enhance member engagement and strategic planning. 


Endeavor 3D Integrates Materialise’s CO-AM with HP Technology to Drive Industrial Volume Production

May 2nd, 2024 – Endeavor 3D, a leading contract manufacturer of additive manufacturing, has announced its strategic relationship with Materialise and HP to onboard the Materialise CO-AM Software Platform to bolster its HP 3D printer production capacity.


Who is Endeavor 3D?

May 1st, 2024 – 3Dprint.com showcases the story of how Endeavor 3D transitioned from traditional manufacturing to a leader in contract additive manufacturing. Starting in September of 2020, Endeavor 3D has set out to revolutionize the additive manufacturing industry.


Endeavor 3D Names Janet Dickinson as Chief Operating Officer

April 2nd, 2024 – Endeavor 3D is pleased to announce that Janet Dickinson will become chief operations officer, effective immediately. Dickinson will be responsible for managing Endeavor 3D’s rapidly growing advanced polymer and metal additive manufacturing and quality control operations….


Building a Metal AM Facility from the Ground Up

February 26, 2024 – Endeavor 3D’s notable Metal Additive Manufacturing (AM) facility gets the company featured in the Canadian Metal Working Magazine. The article takes a look at the unique landscape of AM, lessons learned during the development of the facility, and the future outlook of Metal AM.


Assembly Magazine Interviews Tibor Gyorfi

February 23, 2024 – Endeavor 3D embarked on an ambitious journey to create a state-of-the-art metal binder jetting facility from the ground up. The combination of cutting-edge metal 3D printing technology and a team of metal binder jet specialists has positioned Endeavor 3D as a leading player in metal additive manufacturing.


Endeavor 3D's Tibor Gyorfi Recognized for 30 under 30 by SME

December 20, 2023 – We are proud to announce that Tibor Gyorfi, Metal AM Production Manager at Endeavor 3D, has been names to SME’s prestigious “30 under 30” list. This esteemed recognition spotlights the brightest minds in the manufacturing industry. Tibor’s innovative spirit and exceptional contribution to establishing a metal additive manufacturing business at Endeavor 3D perfectly exemplifies the caliber of talent we foster.


Janet Dickinson, CRO at Endeavor 3D, Joins the 3Degrees Podcast

December 01, 2023 – Janet Dickinson, CRO at Endeavor 3D, joins the 3Degrees Additive Manufacturing show to talk about the journey of building a contract manufacturing business from the ground up. During the discussion, Janet identified identified challenges the team has overcome to make Endeavor 3D a successful business in AM.


Endeavor 3D Joins HP and Sandvik in the Development of New Materials

November 06, 2023 – HP is excited to announce a collaboration with Sandvik to introduce a new set of additive manufacturing materials. The collaboration focuses on amplifying HP’s Metal Jet technology by adding 316L stainless steel to the material lineup. This high strength and corrosion resistant metal unlocks a multitude of unique applications across various industries.


HP's Ramon Pastor Shares an Update on Company's 3D Printing Division

August 21, 2023 – Until 2023, the additive manufacturing (AM) sector appeared fragmented, primarily consisting of startups. However, beneath the surface, there was a growing inclination toward consolidation. Even if this consolidation hadn’t fully materialized, the perception of the industry was changing rapidly. HP, a company that stood apart since it established its 3D printing division in 2015, seemed to play a unique role in this evolving landscape. As 3D printing entered a scale-up phase, HP’s significance in shaping the sector’s trajectory became even more apparent.


MCADCafe Interviews Endeavor 3D's CTO, Tim Marchbanks

August 08, 2023 – We are manufacturers at heart so it’s in our DNA to use our tools to increase efficiencies and reduce costs across the board. Our goal is to pass those benefits along to our partners.” Tim Marchbanks, Chief Technology Officer at Endeavor 3D, sits down with Sanjay Gangal from MCADCafe.com


Future Endeavors: Endeavor 3D and HP on printing for production

May 23, 2023 – Endeavor 3D and HP have been working together to provide production 3D printing capabilities with HP’s flagship Multi Jet Fusion technology. In March, that partnership was elevated as HP invited Endeavor 3D to join a short list of HP Digital Manufacturing Partners, certifying the company as a top tier provider of Multi Jet Fusion part quality and manufacturing expertise.


Stay Connected!

Join Our Newsletter!